Dedicated tools tarp deduction purposes: for playing buttonhole. This section eyelet buttonhole machine drilling and assembly simply press once to complete. The module is equipped with a self-priming module, just need to put the public buttonhole die, the mother mold pieces down, choose the right location direct hit on it, very simple and convenient. Can also be used to play plastic grommets, but need to drilling, the hole diameter equal to or slightly larger than the outer diameter of the projection of the buttonhole, and put the plastic grommets, handle pressure, to complete. Package Contents: foam box containing the handle, buttonhole machine (excluding the handle), modules (internal fight plastic buckle module is equipped with a drilling tool used), 4 6MM flat head screws, 6mm hex wrench a , try to play a pouch buttonhole. Instructions: Take out from the bag buttonhole machine (excluding the handle), a stable place where you want to use; to come up with a hex wrench, loosen the screw mounted handle, mounted on the handle, tighten the screws; out module , first the good die twist, twist twist hand does not move far, vertically lower die and tighten the side screws. Remember not too tight, not loose to guarantee the die. Pressure test to see if what has been put away down mode, please check if there is a large deviation upper and lower die if placed properly. Try to play, try to play the material needs and the actual work of the same material, in order to ensure the best results. If you try to play is not satisfactory, please refer to the phenomenon of analysis and treatment for debugging; after successful commissioning, formally work, if still not satisfied, please contact us.